May 25th, 2004, 01:18 PM
Hi all, I read about the Jimmy Vaughan wiring witha the middle pup open and bridge tone control, but I intend to use only 2 pots on this guitar I'm building. Is there anyreason the JV diagram at Mr. Gearhead would NOT work if I simply wire the neck and bridge pups to the same pot? THX
Jack The Riffer
May 25th, 2004, 03:03 PM
Try this site http://www.guitarnuts.com/howlinkshelp.php
Lots of wiring diagrams and tips.
May 25th, 2004, 05:21 PM
Without going to another site, yes. You can jump the opposite lugs for the neck and bridge pups and use a single tone.
It might be as well, though, to just go with a master tone jumped from the volume pot.