All Parts necks now sold here.......

IF its in stock......I can get it to ya.

Starting @ $149 shipped lower 48.

Nitro tinted and clear....Rolled fret board edges and pretty up those frets $185 shipped lower 48. 2 week turn around on all necks.



http://i68.photobucket.com/albums/i32/jsh1970/Picture734.jpg
http://i68.photobucket.com/albums/i32/jsh1970/Picture732.jpg


Aged and Ooooooh so smooth........$235 shipped.

http://i68.photobucket.com/albums/i32/jsh1970/Picture713.jpg



Cocked,aged and loaded with vintage tuners $295 shipped lower 48.

http://i68.photobucket.com/albums/i32/jsh1970/Picture640.jpg

Couple of questions: Are the Allparts necks exactly the same shape (the headstock, I mean) as stock Fender headstocks? Or are they slightly modified? The fact that I have to ask probably means it doesn't matter.

Second: do you only sell necks branded with your logo? Or can you do...uh.....others?

And those prices are pretty good compared to retail!

Couple of questions: Are the Allparts necks exactly the same shape (the headstock, I mean) as stock Fender headstocks? Or are they slightly modified? The fact that I have to ask probably means it doesn't matter.

Second: do you only sell necks branded with your logo? Or can you do...uh.....others?

And those prices are pretty good compared to retail!


PM coming.

How about shipping to those of us who are not in the lower 48? I'm just across the pond!

Bill

PM me your shipping info.......

Let me know what you have in mind too.
If your wanting a bare neck....I'll suggest getting it from somewhere around there.(ALL PARTS JAPAN) but I can help on a nice aged piece.

Some good necks just went out today......I'll keep prices holding through the weekend.

I gotta say...neck after neck from AllParts are very consistant......nice tight heal to neck pockets......lighter weight and some pretty figure.

For the price and options....ALLPARTS is alright in my book.

ALL PARTS neck install on a MIM Fender Blue Agave telecaster.......Nice upgrade for a giggin' econo fiddle.......set of Vintage T Lollars and nice 3 barrel bridge and a Pearly Pickguard........Rolled the fret board edges and Crown and polish those frets......SLICK setup !!!

http://i68.photobucket.com/albums/i32/jsh1970/Picture760.jpg
http://i68.photobucket.com/albums/i32/jsh1970/Picture761.jpg
http://i68.photobucket.com/albums/i32/jsh1970/Picture762.jpg

Couple of questions: Are the Allparts necks exactly the same shape (the headstock, I mean) as stock Fender headstocks?



They're the same as the CIJ fender guitars, exactly.

That they differ from some MIM and MIA headstocks, well, there's a section at TDPRI on that subject. Fenders do vary.

++++++++++

Southern Ill, that neck came out real nice. Sure is a smart way for folks to get themselves into a new player right now, with times being tight for some folks.

The Allparts necks fit real nice into a MIM Tele.

:grin:

I got in 4 last week......Yes, they are a dang good value.....all were so pretty and not one of them for me !!!

I wish the 12th fret dot spacing was closer(not as much space between them).....but so many options......BB,I'm almost certain that ALLPARTS and the MIJ necks come from the same factory......No?

do these all parts necks do a direct replacement for a 2007/2008 Squier Affinity? I am looking for either a FAT or V, and as inexpensively as possible. I read recently (somewhere around here) that the holes may not line up correctly with the holes in my Affinity body. Can you give me some measurements to check against mine? Please let me know if you'd prefer I PM you. Thanks. Your necks look great.

Heel width = 2 3/16" ......Standard fender spec......Off hand I can't tell ya what those SQUIRES are.....Take a measure on yours.......Jeffro

The heal width is fine, I have heard that the predrilled holes on the allparts neck are standardized, and that sometimes the holes on the Affinity's are a little different. Can you give the distances between the predrilled holes on the neck, and I can see if it will mate to mine or not. Actually, lets make this easy... the short distance between mine are: 1 9/16" and the long way: 2 1/16". How does this match up with your necks?

I've never recieved a neck with pre-drilled holes....That is as easy as it gets.

Hey Jeffro, do the starting prices on the necks include a nut and secondly do you or can you sell replacement nuts like Tusq? Thanks

Jeffro, I pm'd you.

Shop is closed until after the 9-23.........All orders that were paid for by today are incoming and will ship out according to what was wanted......THANKS !!!!

Quick update.....

Anything that was order up until Mon. late morning and was paid for will ship out this week and if there was finish work done by me......it will ship as soon as its ready(2 weeks at the latests)..........

I'll be back in the saddle again as far as orders actually shipping and finish work around late Sep..........All is good......taking baby steps and the one I'm making now is gonna take sometime............and certainly is gonna make things run more smoothly.


With that said.....I can quote a build price and a time frame from start to finish for ya.....I'll be checking in here everyday.......So shoot me a email or call.

Do you know if the TRO-FAT is available again?

I raised it in this thread (http://www.tdpri.com/forum/tele-home-depot/174377-allparts-tro-fat-equivalent.html) and Boris suggested there might be a limited run.

Thanks in advance.

:smile: Peter

Yes, If a TRO-fat is available, please PM me. I´ll buy one immediately.

thanx

I'll check......

Yes, If a TRO-fat is available, please PM me. I´ll buy one immediately.

thanx

Ditto on that!!

Just talked with my rep.....SOLD OUT !!!!

Looks like next run should be ready in 2-3 months.......I asked if there was certain to be another run and the answer was "Yes"........

I snoozed the last go around........so I'm bummed about too.

Check in from time to time and I'll update how far out the due date is.......Sorry,Jeffro

When you begin taking orders again, what is the cost of a TMO-FAT with nut installed? Can I get one in tinted satin? Thanks. Your work looks great.

PM coming.

I'm in. I definitely want one, so let us know as soon as they are available.

Thanks. I've zapped you an e-mail.

:smile: Peter

Thanks guys......Check back often.....I'll bug Shawn my rep. once or twice a week.

AS SOON AS I hear they are on the way I will take orders.....First come first serve.

Any word on the TRO-Fats?

Any word on the TRO-Fats?

I couldn't wait. I've bougt a FAT Musikraft as I need one pretty quickly.

:smile: Peter

Got a order to place Monday.....and I have Shawn workin' hard over @ ALLPARTS trying to get me some more info.....Check back Mon. evening.

Just talked again with Michael and Shawn......AT THIS TIME...ALLPARTS ARE NOT PLANNING TO DO ANOTHER RUN OF THE TRO-FAT NECKS !!!

No TRO-Fatty necks .......I won't go into what I was told......but the gentleman I talk with a dew weeks ago is no longer there..........Michael and Shawn the 2 reps I spoke with refused to admit that had ever did a run of them.......


Call them up and demand and request them.

PMed !