June 1st, 2009, 02:18 AM
I'm ready to order a dp/dt mini switch for my deluxe nashville tele to add
the combo of neck/bridge & neck/middle/bridge but I'm not sure which switch to order. Would it be a on/on or on/off or on/off/on or on/on/on?:?: I already know how to wire but just not sure which switch. Thanks for help.
June 1st, 2009, 08:16 AM
Neck on or Bridge on whichever:
I did this with a push/pull pot and it's nice to have the n&b like a reg. Tele.
June 1st, 2009, 02:00 PM
If I do the push/pull 250 pot is the wires ran the same as a mini switch? Looking at, looks like normal pot on top and mini switch on bottom.
June 1st, 2009, 02:58 PM
Just run one jumper wire (from the 5 way) to the (p/p) middle terminal and another from the p/p terminal NEAREST the pot end ( control plate) to the outer vol control. term.
That way when you pull UP on your knob, it feeds that pickup in to whatever you have going ( 5 way switch wise).
I did the p/p to my tone pot as I thought it would get in the way strumming when on the volume pot :razz:
June 1st, 2009, 03:47 PM
Thanks just what I was looking for . Now I dont have to drill a hole!
June 1st, 2009, 04:13 PM
Your very welcome,
I agree, NO EXRA HOLE
June 1st, 2009, 09:08 PM
sjtalon, thanks again I went down to the music store by my house and got an allparts p/p. The thing worked great did exactly what I wanted and nobody will know I add extra switching unless I show them . Very happy
June 1st, 2009, 09:18 PM
Good deal !!
Just like the USAF F-22