Bandit Footswitch

Can anyone tell me how it its wired? From what I suspect it is a stereo male jack So is the tip hot or the short section on the sleeve after the tip? Or are they both used for Channel switching and reverb? If so which is for channel and which is for reverb?

If it's a 1/4" jack, it should be the same as my Express. The sleeve is common, the tip is reverb, and the ring is channel switching. Just about any 2 button footswitch will work, but there's no voltage on the line, so if your footswitch has LED's, the LED's won't light up.

Thanks for the info