Help with a speaker cabinet wiring

Apok · January 1st, 2008, 02:37 PM

Hey guys, I had a few small old computer speakers around and decided that I'd build a box and have a small speaker cabinet for my Smokey amp.

The only thing is I have no idea if it will work, I've got three, 2 are identical. So I built a box and I know where I'm going to mount them, I've got a 1/4 mono jack installed in it as well.

I was wondering if anyone could draw me up a digram including where I solder the wires to the jack, it would be very much appreciated.

Cheers

JohnnyCrash · January 1st, 2008, 03:28 PM

Do you have any idea what their impedances are?

Apok · January 1st, 2008, 03:48 PM

I know one is 4ohm but I have no clue on the other two

January 1st, 2008, 02:37 PM	#1 (permalink)
Apok Tele-Meister Join Date: Dec 2004 Location: Newfoundland Age: 21 Posts: 104	Help with a speaker cabinet wiring Hey guys, I had a few small old computer speakers around and decided that I'd build a box and have a small speaker cabinet for my Smokey amp. The only thing is I have no idea if it will work, I've got three, 2 are identical. So I built a box and I know where I'm going to mount them, I've got a 1/4 mono jack installed in it as well. I was wondering if anyone could draw me up a digram including where I solder the wires to the jack, it would be very much appreciated. Cheers

January 1st, 2008, 03:28 PM	#2 (permalink)
JohnnyCrash Poster Extraordinaire Join Date: Mar 2005 Location: Lost Angeles and Orange County Posts: 7,134 39 Photos	Do you have any idea what their impedances are? __________________ . Learn about safety before building/repairing/modding an amp. When in doubt, take it to a shop. Never drink yellow snow. Have fun.

January 1st, 2008, 03:48 PM	#3 (permalink)
Apok Tele-Meister Join Date: Dec 2004 Location: Newfoundland Age: 21 Posts: 104	I know one is 4ohm but I have no clue on the other two