Installing New Speaker Question

Daddydex · September 4th, 2007, 01:34 PM

Carvin XV amp. 12 inch Warehouse Guitar speaker coming tomorrow. There are no nuts and bolts or screws in the amp. Will they be included with the speaker? If not, are they a standard size? I want to be prepared when the speaker arrives. Thank for the help.

Dan

Daddydex · September 4th, 2007, 07:50 PM

Surely there is one among you who can answer this question.

Dan

Telenator · September 4th, 2007, 07:58 PM

There usually are no screws, nuts or hardware included when buying a new speaker because of all the different applications. Just head down to your local hardware store and try a few things til you get the proper thread size.

Then, when you go home to mount the speaker, be sure not to over-tighten the dang thing! You'll wreck the tone and the speaker by doing so.

Red Planet · September 4th, 2007, 09:34 PM

The Amp should have cletes in the front of it.m They should except a Machine Screw. I dont know off the top of my head what standard is but they will be around a # 8 or # 10

Daddydex · September 4th, 2007, 10:37 PM

Thanks guys. I am trying to avoid dragging my amp to the hardware store but I will do that if that is what it takes.

Dan

September 4th, 2007, 01:34 PM	#1 (permalink)
Daddydex Tele-Afflicted Join Date: Feb 2007 Location: Pennsylvania Posts: 1,496	Installing New Speaker Question Carvin XV amp. 12 inch Warehouse Guitar speaker coming tomorrow. There are no nuts and bolts or screws in the amp. Will they be included with the speaker? If not, are they a standard size? I want to be prepared when the speaker arrives. Thank for the help. Dan __________________ Teles are like Mr. Potato head

September 4th, 2007, 07:50 PM	#2 (permalink)
Daddydex Tele-Afflicted Join Date: Feb 2007 Location: Pennsylvania Posts: 1,496	Surely there is one among you who can answer this question. Dan __________________ Teles are like Mr. Potato head

September 4th, 2007, 07:58 PM	#3 (permalink)
Telenator Friend of Leo's Join Date: Sep 2005 Location: Connecticut Posts: 4,403	There usually are no screws, nuts or hardware included when buying a new speaker because of all the different applications. Just head down to your local hardware store and try a few things til you get the proper thread size. Then, when you go home to mount the speaker, be sure not to over-tighten the dang thing! You'll wreck the tone and the speaker by doing so. __________________ Dogs have the right idea!

September 4th, 2007, 09:34 PM	#4 (permalink)
Red Planet Tele-Meister Join Date: Feb 2004 Location: North Georgia Posts: 421	The Amp should have cletes in the front of it.m They should except a Machine Screw. I dont know off the top of my head what standard is but they will be around a # 8 or # 10 __________________ RC Cola and a moon Pie!

September 4th, 2007, 10:37 PM	#5 (permalink)
Daddydex Tele-Afflicted Join Date: Feb 2007 Location: Pennsylvania Posts: 1,496	Thanks guys. I am trying to avoid dragging my amp to the hardware store but I will do that if that is what it takes. Dan __________________ Teles are like Mr. Potato head