Tube replacement suggestions for H.R. Blues Deville w/410's

rb.jr · September 11th, 2003, 02:38 AM

This question maybe posted but I could'nt find it.This will be the first time I have replaced the tubes and I don't have a clue.
I know a great amp tech, but he only deals in certain brand names but will put in whatever I bring him.Thanks to anyone for
your help.
Ron

eryque · September 11th, 2003, 07:44 AM

I really liked Svetlana 6L6GCs in the power section and a 12AX7LPS in the first preamp slot when I had mine.

Lotsa folks have recommended JJs, which I never tried in the Deville, but in my Pro Reverb they sound as good or better than the Svets.

Darrell · September 11th, 2003, 08:35 AM

in the exact same position. I have an HRD, the little brother to your amp. It blew a power tube and an AX7 in the last few months. I took it to my tech. He put in Electro Harmonics Russian mades. I am pleasantly surprised by the results. I ended up with prettier mids, sweeter highs, and better drive/warmth at low volumes. The downside, is that the tone is fatter, I prefer it tiny. But I can work around that.

Primo Don · September 11th, 2003, 11:33 AM

rb.jr...

If you're changing tubes to improve the sound of your HRDV410... I have one and the greatest thing I did was change the speakers. When I was going through the madness of upgrading tubes, I went through these 12AX7's: Electro-Harmonix, JJ/Tesla, Sovtek, etc. The diiference in the sound was minimal at best and I was still not satisfied, so I then addressed the speakers. I use MojoTone 70watters, but 2 dozen folks around the board have their own favorites. What a vast improvement. (Thanks to all on the TDPRi that assisted with that project!) FWIW, I put Sovtek 5751's in the first two slots, which reduces the gain and something Telefunken (AT7?) in the inverter slot. These, coupled with the higher wattage speakers have made this amp into one I'll keep for a long time. It's MUCH

louder and breaks up later, which may or may not appeal to you.

Good luck and have fun! Adam

rb.jr · October 1st, 2003, 01:01 AM

Thanks for all of your help.

September 11th, 2003, 02:38 AM	#1 (permalink)
rb.jr Tele-Meister Join Date: Aug 2003 Location: calhoun,ga Posts: 127	Tube replacement suggestions for H.R. Blues Deville w/410's This question maybe posted but I could'nt find it.This will be the first time I have replaced the tubes and I don't have a clue. I know a great amp tech, but he only deals in certain brand names but will put in whatever I bring him.Thanks to anyone for your help. Ron

September 11th, 2003, 08:35 AM	#3 (permalink)
Darrell Friend of Leo's Join Date: Mar 2003 Location: Houston, Texas Age: 48 Posts: 2,463	I recently found myself in the exact same position. I have an HRD, the little brother to your amp. It blew a power tube and an AX7 in the last few months. I took it to my tech. He put in Electro Harmonics Russian mades. I am pleasantly surprised by the results. I ended up with prettier mids, sweeter highs, and better drive/warmth at low volumes. The downside, is that the tone is fatter, I prefer it tiny. But I can work around that. __________________ "Yeap, I like the American Standard Telecaster, I can even live with one a them PCB amps, and I even use one a them mul-tie-effects things too."

September 11th, 2003, 07:44 AM	#2 (permalink)
eryque Poster Extraordinaire Join Date: Mar 2003 Location: albany, ny [not chicago] Posts: 6,977 44 Photos	I really liked Svetlana 6L6GCs in the power section and a 12AX7LPS in the first preamp slot when I had mine. Lotsa folks have recommended JJs, which I never tried in the Deville, but in my Pro Reverb they sound as good or better than the Svets.

September 11th, 2003, 11:33 AM	#4 (permalink)
Primo Don Tele-Meister Join Date: Mar 2003 Location: Orlando, FL Age: 31 Posts: 381	rb.jr... If you're changing tubes to improve the sound of your HRDV410... I have one and the greatest thing I did was change the speakers. When I was going through the madness of upgrading tubes, I went through these 12AX7's: Electro-Harmonix, JJ/Tesla, Sovtek, etc. The diiference in the sound was minimal at best and I was still not satisfied, so I then addressed the speakers. I use MojoTone 70watters, but 2 dozen folks around the board have their own favorites. What a vast improvement. (Thanks to all on the TDPRi that assisted with that project!) FWIW, I put Sovtek 5751's in the first two slots, which reduces the gain and something Telefunken (AT7?) in the inverter slot. These, coupled with the higher wattage speakers have made this amp into one I'll keep for a long time. It's MUCH louder and breaks up later, which may or may not appeal to you. Good luck and have fun! Adam

October 1st, 2003, 01:01 AM	#5 (permalink)
rb.jr Tele-Meister Join Date: Aug 2003 Location: calhoun,ga Posts: 127	Thanks for all of your help.