Blues Jr 12" vs Pro Jr 10"

unclearty · January 10th, 2007, 06:32 AM

Just got my new BJ last night. I now understand about the boxy sound issue I've read about. People here have this idea that the Pro Jr "sounds" better than the BJ. I have an Emminence Ragin Cajun 10" that I bought for my Frontman 25R. It dramatically improved the sound of that amp. I'm thinking about removing the baffle from my BJ and making a new one to hold the 10" Ragin Cajun. If the BJ and PJ are basically the same amp, wouldn't this make an improvement in the BJ's sound? Or...is there a better, inexpensive improvement I can do?

axg20202 · January 10th, 2007, 06:57 AM

You might want to consider doing some of the BillM mods, particularly the tone stack mod and adjustable bias mod.

http://home.comcast.net/~machrone/bluesjunior.htm

SEK_Hakuna · January 10th, 2007, 08:18 AM

The BJr has a short speaker cable with a 1/4" connector on one end. Make a longer cable just like the one in the BJ and run it over to your 10" amp. The sound could be tested without tearing apart the BJr.

unclearty · January 10th, 2007, 08:27 AM

Great ideas! I've already printed out the Billm mod for the tone stack..and I'll make up a cable tonight. Thanks!

January 10th, 2007, 06:32 AM	#1 (permalink)
unclearty Tele-Meister Join Date: Feb 2006 Location: South central Mass. Age: 56 Posts: 316 2 Photos	Blues Jr 12" vs Pro Jr 10" Just got my new BJ last night. I now understand about the boxy sound issue I've read about. People here have this idea that the Pro Jr "sounds" better than the BJ. I have an Emminence Ragin Cajun 10" that I bought for my Frontman 25R. It dramatically improved the sound of that amp. I'm thinking about removing the baffle from my BJ and making a new one to hold the 10" Ragin Cajun. If the BJ and PJ are basically the same amp, wouldn't this make an improvement in the BJ's sound? Or...is there a better, inexpensive improvement I can do? __________________ uncle-arty

January 10th, 2007, 08:27 AM	#4 (permalink)
unclearty Tele-Meister Join Date: Feb 2006 Location: South central Mass. Age: 56 Posts: 316 2 Photos	Great ideas! I've already printed out the Billm mod for the tone stack..and I'll make up a cable tonight. Thanks! __________________ uncle-arty

January 10th, 2007, 06:57 AM	#2 (permalink)
axg20202 TDPRI Member Join Date: Aug 2006 Location: London Posts: 89	You might want to consider doing some of the BillM mods, particularly the tone stack mod and adjustable bias mod. http://home.comcast.net/~machrone/bluesjunior.htm

January 10th, 2007, 08:18 AM	#3 (permalink)
SEK_Hakuna Tele-Meister Join Date: Jul 2003 Location: Kansas Age: 51 Posts: 176 15 Photos	The BJr has a short speaker cable with a 1/4" connector on one end. Make a longer cable just like the one in the BJ and run it over to your 10" amp. The sound could be tested without tearing apart the BJr.