SF Bassman

yegbert · November 13th, 2005, 11:53 PM

I just bought this one today, a silverface drip-edge Bassman. The cab is a 2x12, the size the Fender Amp Field Guide identifies as 40" x 29.5" x 11.5". The tolex is ragged on the side with the wheels, the corner protectors are rusty. The top speaker hole had been enlarged for a 15" and then an unlabeled 12" reinstalled with an extra mounting board, but the bottom 12" may be the original. A grounded power cord had been installed. It works but has some hum, I'll have to pay a visit to my local amp tech.

Brick · November 14th, 2005, 09:02 PM

Very cool. There are a few very easy mods in the power amp section that make these sound even better. If your tech doesn't know them run like heck. A couple of Weber California speakers would be oh so tasty.

tele71 · November 19th, 2005, 07:13 AM

If you need service check this guy out. He turned mine around in a day for 40.00$ out the door. He's local so no shipping and he dose some great work. steve gupta [steve@sdgvintage.com]. Top flight tech. Just thought i would let you know. :)
Paul

yegbert · November 19th, 2005, 09:34 AM

Quote:

Originally Posted by tele71

If you need service check this guy out. He turned mine around in a day for 40.00$ out the door. He's local so no shipping and he dose some great work. steve gupta [steve@sdgvintage.com]. Top flight tech. Just thought i would let you know. :)
Paul

Where is Steve located? I'm in Clinton, MD.

Tim Armstrong · November 19th, 2005, 12:18 PM

I can't say enough good things about Paul (Paradoc) Mastradone in Beltsville, Maryland:

Paul Mastradone
Paradocs Specialties
Beltsville, MD 20705
301-937-1895 Fax 301-937-1895

Cheers, Tim

November 13th, 2005, 11:53 PM	#1 (permalink)
yegbert Friend of Leo's Join Date: Sep 2004 Location: Clinton, Maryland (US) Age: 54 Posts: 4,989 88 Photos	SF Bassman I just bought this one today, a silverface drip-edge Bassman. The cab is a 2x12, the size the Fender Amp Field Guide identifies as 40" x 29.5" x 11.5". The tolex is ragged on the side with the wheels, the corner protectors are rusty. The top speaker hole had been enlarged for a 15" and then an unlabeled 12" reinstalled with an extra mounting board, but the bottom 12" may be the original. A grounded power cord had been installed. It works but has some hum, I'll have to pay a visit to my local amp tech.

November 19th, 2005, 07:13 AM	#3 (permalink)
tele71 Tele-Meister Join Date: Mar 2003 Location: Washington DC Posts: 169	Nice amp If you need service check this guy out. He turned mine around in a day for 40.00$ out the door. He's local so no shipping and he dose some great work. steve gupta [steve@sdgvintage.com]. Top flight tech. Just thought i would let you know. :) Paul

November 19th, 2005, 12:18 PM	#5 (permalink)
Tim Armstrong Moderator Doctor of Teleocity Join Date: Mar 2003 Location: Berlin, Maryland, USA Age: 49 Posts: 10,257	I can't say enough good things about Paul (Paradoc) Mastradone in Beltsville, Maryland: Paul Mastradone Paradocs Specialties Beltsville, MD 20705 301-937-1895 Fax 301-937-1895 Cheers, Tim __________________ http://www.moodswingers.org

November 14th, 2005, 09:02 PM	#2 (permalink)
Brick Tele-Holic Join Date: Mar 2003 Location: San Jose Age: 58 Posts: 793	Very cool. There are a few very easy mods in the power amp section that make these sound even better. If your tech doesn't know them run like heck. A couple of Weber California speakers would be oh so tasty.