NCD: Univox U410PA

[dragonfly66]

I went into a pawnshop because a friend of mine was looking for a tool and he came out with nothing and I came out with this cab.



It has Univox Pro-Mag Series 137 7446 10" speakers. Wired for 8 Ohms.




Looks like the cabinet is partical board and the baffle and baffle frame are ply wood.



I've been playing my Crate V33H through it, but not enough yet to see what it can do. I think I might hook up my 1x15 open back cab and the 410 as an extension and see what happens. So far the cleans and dirty sound good though it is very bassy when laying flat on the floor. I turned the bass down to 1 or 2 to compensate. When the cab is vertical most of that bass goes away, but I still only have the bass on 3-4.

[xtemplarx]

These were pretty cool... Originally marketed as a P.A. speaker, I'd venture to say. The univox website should at least show a catalog shot of it somewhere... http://univox.org

[xtemplarx]

http://www.univox.org/pics/catalogs/u50par_catalog.jpg

[uriah1]

Speaker codes are CTS..nice...square could be Alnico too!!

[dragonfly66]

Nice! Thanks for the catalog photo. I couldn't find anything on this cab.

I've been playing a Mustang Floor with .44 Magnum amp through it lately. It really sounds good.

[SamClemons]

I just sold a pair of these. Chained together they make an awesome full stack for an amplifier head and often can be picked up for little or nothing.