It is interesting in the Fender Excelsior how they separated the preamp and power amp sections. This must be a late prototype as it is marked "NAMM1" and has a 230V 50 Hz power transformer. Note the metal shielding used over the wiring from the preamp to power section on one of the two units.
The Greta seems to be getting much more attention because of its cute looks. I wasn't much interested in the Excelsior until I got a look at the interior. I am interested to see view of circuit or schematic when available.
The mag on that speaker looks really small.. the sideways label, looks like emi.
Oh well..probably dont need much
All you really need to know for the moment is that the universe is a lot more complicated than you might think, even if you start from a position of thinking itís pretty damn complicated in the first place......"D.Adams"
The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation. The TDPRI is an independent, member supported forum and is not affiliated with Fender Musical Instruments Corporation.