|
Jwells, im running the router along the right direction, acordding to your diagram. The problem im facing is not so much as tear out, but the surface is becoming rough and "hairy"...
Didnt try to sharpen my bit, Ron! good thing you warned me, though, i was about to have a go using my dremel...
I just realized that this bit im using is perhaps 1/32 smaller than 1/2" (leaving a bit of wood still to be removed!)! So i went out and bought a nice Bosch one, exactly 1/2" diameter, which I will use after having done the first pass using the first bit.
Rainy cold day today, so i dont think ill have much done...
Pictures to come!
Thanks for all the help!
Cheers
André Ripoll
|