...Place yer VOM leads on the switch with the hot lead tew the tab where the P/U hooks on tew the switch and ground lead tew any true ground (pot back, switch base or udder metal which is usually grounded).
... Make sure the switch is in the neck P/U position when checking lead P/U and visa versa.
...This will onlee giff yew a raw resistance reading and knott a true impedance reading. Usefull onlee with the thought in mind that a higher resistance reading will giff a hotter P/U but will haff nuttin tew dew with final sound as compaired tew a lower raw resistance P/U with a different windin and/or mag-a-nutes.
Please visit my page