Telecaster Guitar Forum - View Single Post - Back-routed Tele advice?

Guitarnut · March 6th, 2012, 02:38 PM

The first Tele I built was a carved top with no PG and rear routed. I drilled from the neck pocket thru to the bridge PU route and then from there to the control cavity. You'll need a 12" long .250" bit to make sure it reaches and doesn't wander.

Mark

March 6th, 2012, 02:38 PM	#2 (permalink)
Guitarnut Friend of Leo's Join Date: Jun 2009 Location: USA Posts: 3,803	The first Tele I built was a carved top with no PG and rear routed. I drilled from the neck pocket thru to the bridge PU route and then from there to the control cavity. You'll need a 12" long .250" bit to make sure it reaches and doesn't wander. Mark __________________ "Thought that is no longer limited brings experience that is no longer limited" Marianne Wiliamson