February 15th, 2012, 02:53 PM
Join Date: Jan 2012
Multiple Spring Reverb Units in One Amplifier
If there is enough space within an amplifier it is possible to have multiple spring reverb tanks.
Parameters You Could Adjust using Multiple Tanks
Type 4 (2 Springs)
You could select between Short and Long Delay
You could select from long, medium and short decay
You would use an RCA Switch Box with Manual Switches or Remote Control to switch between the spring-reverb tanks. The Switch box would perform the signal routing between the tanks and amplifier drive / retrieve pre-amp sections.
- Long (2.75 to 4.0s)
- Medium (1.75 to 3.0s)
- Short (1.2 to 2.0s)