Telecaster Guitar Forum - View Single Post

stax · April 12th, 2011, 08:36 AM

Hi all, just finished a Zen clone using Madbeans Serendipity board, well I say finished, it works and sounds good but I’m waiting on the 10k lin voice pot which I’ve had trouble getting.
Did a bit of research and on average with single coils the voice knob is set to about 2 o clock.
What resistor could I temporally put in so I can use it, I’m guessing a 3k3 or 4k7 would do but thought I’d check with the experts.
Thanks in advance
Stax

April 12th, 2011, 08:36 AM	#1 (permalink)
stax Tele-Holic Join Date: Jul 2006 Location: Brentwood U.K. Age: 57 Posts: 820 9 Photos	Zen clone resistor sub for voice pot Hi all, just finished a Zen clone using Madbeans Serendipity board, well I say finished, it works and sounds good but I’m waiting on the 10k lin voice pot which I’ve had trouble getting. Did a bit of research and on average with single coils the voice knob is set to about 2 o clock. What resistor could I temporally put in so I can use it, I’m guessing a 3k3 or 4k7 would do but thought I’d check with the experts. Thanks in advance Stax

Sponsored Ads	#
Forum Sponsor Sponsored posting Join Date: March, 2003 Location: Forum HQ Age: Posts: N/A	Sponsored by...