Telecaster Guitar Forum - View Single Post - Bigsby with Jaguar style bridge mounting?

Poppatwang · June 2nd, 2003, 11:18 AM

Looks right to me. I installed that setup on mine.
I used "paper tape", a low adhesive tape for securing
art paper to a drawing board. Applied tape to body
(mine was factory finished) as a surface to draw
template on. Measure, mark & recheck 3 times before
drilling. I put the ground wire thru the side of the
bridge ferrule hole.

Good luck!

June 2nd, 2003, 11:18 AM	#2 (permalink)
Poppatwang Tele-Afflicted Join Date: Mar 2003 Location: St. Paul, MN Posts: 1,892 13 Photos	Fuzzy Pic Looks right to me. I installed that setup on mine. I used "paper tape", a low adhesive tape for securing art paper to a drawing board. Applied tape to body (mine was factory finished) as a surface to draw template on. Measure, mark & recheck 3 times before drilling. I put the ground wire thru the side of the bridge ferrule hole. Good luck!