Telecaster Guitar Forum - View Single Post

Godot · July 26th, 2009, 12:55 AM

OK (crickets) I got the bushings in. It took a little coaxing with a step bit and a bastard file. I removed enough wood to get them in halfway, then pressed them in flush with vise grips.

So for the record, Guitar Parts Resource conversion bushings TK-0900-001 don't fit American Standard Teles without reaming out the holes.

The rest of the guitar's done too, just haven't set harmonics yet.

July 26th, 2009, 12:55 AM	#15 (permalink)
Godot TDPRI Member Join Date: Dec 2008 Location: Austin, Texas Age: 37 Posts: 27	OK (crickets) I got the bushings in. It took a little coaxing with a step bit and a bastard file. I removed enough wood to get them in halfway, then pressed them in flush with vise grips. So for the record, Guitar Parts Resource conversion bushings TK-0900-001 don't fit American Standard Teles without reaming out the holes. The rest of the guitar's done too, just haven't set harmonics yet.