|
Here is a description of the switch wiring.
Left side - #1 post open
#2 volume pot ground and bridged to #3
#3 bridged to #2
#4 bridged to bottom right #5 post
#5 (common) to Neck green wire.
Right side - #1 (common) to black bridge wire
#2 Red to volume pot front left post which is jumped to top front left of push pull pot and on to the black neck wire
#3 Bridged to #2 only
#4 open
#5 bridged to #4 on left side
I think my bridge on the right side needs to be moved down one post to #3 #4? as when I am in the #1 position both pups are active? Any thoughts?
|