Telecaster Guitar Forum - View Single Post - Wiring a humbucker w/4-way switch

Deaf Eddie · June 25th, 2009, 03:13 PM

Don't forget, the bare wires in the lead bundles for each pickup go to ground - I don't show that in the drawing.

For the bridge pup, it goes with its green lead to the back of the the tone pot; for the neck pup, it goes straight to ground on the back of the volume pot (the neck pup green lead does NOT go to ground).

June 25th, 2009, 03:13 PM	#49 (permalink)
Deaf Eddie Tele-Afflicted Join Date: Mar 2003 Location: Sunny San Diego, CA Posts: 1,741 14 Photos	Don't forget, the bare wires in the lead bundles for each pickup go to ground - I don't show that in the drawing. For the bridge pup, it goes with its green lead to the back of the the tone pot; for the neck pup, it goes straight to ground on the back of the volume pot (the neck pup green lead does NOT go to ground). __________________ YMMV - I been wrong before...