Here's mine:
I got the case from our other guitarist when he upgraded to a bigger one. It originally had just a rubber-mat covered hardboard in there to which I zip tied the extension, Holy Grail, Blues Driver and that odd phaser. Long story short; I then bought the tuner and shortly after the CS-3 so finally last weekend I decided to redo the whole thing. My goals were to
1) Make it to a built-in-the-case board so that I don't need to move the pedals in and out
2) Hide the most of the wires
3) Fit the extension flush to the board
I think I went a bit over the ...ummm... board but I'm pretty satisfied with it anyway. The phaser is not connected at the moment because I rarely use it.