Telecaster Guitar Forum - View Single Post - Wiring a humbucker w/4-way switch

RunawayJim · May 26th, 2009, 12:27 PM

Hey Eddie, got a problem! Got evrything wired up per this diagram here: http://www.seymourduncan.com/support...matic=tele_4ws

Now of course the black and white wire references in this diagram don't match up to SD's wiring color scheme, so I did account for that per your instructions above.

Now, here's the issue - positions 1&2 sound exactly the same, and positions 3&4 also sound the same. It's like there is NO position where both pickups are used together. Any ideas???

Mark

May 26th, 2009, 12:27 PM	#29 (permalink)
RunawayJim NEW MEMBER! Join Date: May 2009 Location: Chattanooga TN Age: 34 Posts: 7	Hey Eddie, got a problem! Got evrything wired up per this diagram here: http://www.seymourduncan.com/support...matic=tele_4ws Now of course the black and white wire references in this diagram don't match up to SD's wiring color scheme, so I did account for that per your instructions above. Now, here's the issue - positions 1&2 sound exactly the same, and positions 3&4 also sound the same. It's like there is NO position where both pickups are used together. Any ideas??? Mark