|
The way I set mine up is like this. I lower the bridge pickup to the lowest position (ussually to the point where it is touching the buttom of the pickup route). I then adjust the neck pickup height until the volume of the two pickups is equal. This way the pickups tend to take more tone from the wood, while adding more bass to the bridge pickup and avoiding the dreaded icepick tone that can occur with a telecaster.
Than again this approach isn't for everyone. I'm very unconvential with things like nice. I also have a habbit of turning my mids up to the highest setting to make up for all the metal heads in the world who scope theirs.
|