Telecaster Guitar Forum - View Single Post - Blackguard Telecaster Build

Motor · September 18th, 2008, 07:55 PM

Hi carbonti,

Thanks for the comments. What measurements were your neck headstocks? I sent Tommy a note and this was his reply.

I hope to see photos of your projects posted here soon.

Cheers,

Motor

--------

> Thursday, September 18, 2008 11:52 AM
> From:Tommy Rosamond
>
> The heads are .560" give or take a few thousandths.
> You should not have to sand down the head at all.
> The high E tuner will normally just clear to string
> and wind it up but it works.

September 18th, 2008, 07:55 PM	#55 (permalink)
Motor Tele-Meister Join Date: Aug 2008 Location: Portland Oregon Posts: 340	Hi carbonti, Thanks for the comments. What measurements were your neck headstocks? I sent Tommy a note and this was his reply. I hope to see photos of your projects posted here soon. Cheers, Motor -------- > Thursday, September 18, 2008 11:52 AM > From:Tommy Rosamond > > The heads are .560" give or take a few thousandths. > You should not have to sand down the head at all. > The high E tuner will normally just clear to string > and wind it up but it works.