Telecaster Guitar Forum - View Single Post

Jim.Collins · May 14th, 2008, 10:01 AM

Is the low lug of the volume pot bent over and soldered to the volume pot casing? (The low lug is the one on the right, as they are facing you, and the shaft is pointed to the floor.)

May 14th, 2008, 10:01 AM	#4 (permalink)
Jim.Collins Tele-Meister Join Date: Feb 2005 Location: Pleasanton, CA Age: 54 Posts: 444	Is the low lug of the volume pot bent over and soldered to the volume pot casing? (The low lug is the one on the right, as they are facing you, and the shaft is pointed to the floor.)