Hey all.
In a short amount of time I'm going to put together a partscaster/Esquire, and I have a complete list of parts excluding the pickup. I recently heard talk of people buying a single EMG pickup (
http://www.emginc.com/displayproduct...ca talogid=46) and putting it in the bridge position with just the volume and tone knobs and no three way switch like a normal Esquire. Knowing that, I have two questions. If I were to do this, exactly how much tone control would I have? Also, if I chose to go a different route and wanted to wire it like a typical Esquire, would this be possible knowing that the EMG would be active?
I'm just trying to figure out my options here.
Thanks!