Lots of leather and plastic to go through, but those 1/2 screws are long enough.
Before I sent the body to Doug, the control plate had to come off. That S-1/4-way wiring is a real rat's nest!
I took some photos before I unsoldered things to help me get them back where they were.
I think they'll come in handy.
I lengthened some wires to make things easier to reach. Someday I'll need to pickup some heat-shrink tubing so things can look neater.
It worked the first time!
With the pickguard and control plate in place, we'll take off the PPP (Pickguard Protective Plastic.)
I hope I like the neck pickup height. Not only are the adjustment screws under the pickguard, they are also under the leather!