Telecaster Guitar Forum - View Single Post

mikespe · April 12th, 2008, 11:11 AM

I have a Behringer GMX210 that has two 10" JENSEN speakers in it. I don't use the amp anymore and I thought it might be fairly easy to convert to a 2x10 cabinet. The amp part is easily removed, however, the speakers are hard wired to the amp...no speaker jacks. I would have to install this myself.

I have a few questions:

How do I know what ohm the cabinet will be?
Is there a way of converting the ohm to another rating (say an 8ohm to 4ohm)?
Are there any diagrams for wiring 2 speakers to the 1/4" speaker jack?
Any other factors I should consider?

Thanks for your help!

April 12th, 2008, 11:11 AM	#1 (permalink)
mikespe Tele-Afflicted Join Date: Feb 2007 Location: Western New York Age: 42 Posts: 1,065	Converting Behringer GMX210 to 2x10 Cab? I have a Behringer GMX210 that has two 10" JENSEN speakers in it. I don't use the amp anymore and I thought it might be fairly easy to convert to a 2x10 cabinet. The amp part is easily removed, however, the speakers are hard wired to the amp...no speaker jacks. I would have to install this myself. I have a few questions: How do I know what ohm the cabinet will be? Is there a way of converting the ohm to another rating (say an 8ohm to 4ohm)? Are there any diagrams for wiring 2 speakers to the 1/4" speaker jack? Any other factors I should consider? Thanks for your help!