|
The SNAFU ............ as I have mentioned in other threads, I like to take shallow depth cuts when routing. Yesterday I was doing some template routing on the router table and set the depth for a shallow cut.....too shallow. Didn't notice that the bearing on the bit wasn't above the surface of the router table. The cutter cut into the template and beyond the intended area on the workpiece. Now I'm repairing the template and patching the workpiece.
__________________
Jack's Disclaimer: When I say something.... always ask yourself ..... "What the hell does he know?" _ 
Guys - learn to disable the flash on your digital cameras.
|